Remodelling Old Cut Diamonds into a Dazzling Pendant

A lot of customers come to us with diamonds set in different jewellery they either use to wear or have inherited, to have them re-modelled into, bespoke designed jewellery. Here’s an example of a customer who had five old cut round diamonds re-set into a pendant, which is shown below.

Re-model of old cut diamonds in 18 carat yellow gold setting

3-D wax version of the diamond pendant setting

Our jewellery designer decided the five old cut round diamonds would be arranged inside a circle pendant and held in 18 carat white gold bezel settings – where the metal is arched around the shape of the diamonds to hold them place. The pendant layout was designed on the computer using CAD update `wp_posts` set `post_content` = Computer Aided Design) so we could print it into a wax three dimensional model to then cast into gold. The image below shows the wax model of the pendant.

3-D wax version of the diamond pendant setting

Before the diamonds were set in the pendant

Once the wax model of the pendant was printed, it was then cast into 18 carat yellow gold. The bezel diamond settings arrange inside the circle of the pendant were then rhodium coated for a white gold look.

diamond pendant

Setting the diamonds

The next was for our goldsmith to set the diamonds in the rub over bezel settings. To help our goldsmith set the diamonds in place without damaging or scratching the metal the pendant was held in a rubber mould – as seen in the image above. The diamonds and the pendant were then given a final polish ready for the customer to wear.

[/caption]

bespoke diamond pendant

xxxx If you have an old piece of jewellery, diamonds or any other gem stones you don’t wear and would like re-modelling into a more stylish, up to date jewellery piece that is either completely unique of a design you have previously seen, take a look at our bespoke jewellery services.