Seven Diamonds we Have Re-modelled into a Unique Diamond Pendant
We were recently asked to re-model these seven round brillaint cut diamonds into a stunning, unique diamond pendant, which was inspired by our single stone halo pendant design from our colletion. The pendant is set with seven round brilliant cut diamonds with a total weight of 3.76cts. The customer wanted the pendant to feature a vintage looking halo design, where smaller diamonds border the seven lager diamonds. The total carat weight of the small diamonds beautifully pavé set in a halo design weigh a total of 0.45cts. To create a stylish look for the pendant we suggested that the seven larger diamonds should be set in rub over settings. The rub over setting gives the pendant a modern, simple look, as the diamonds are secured with a gentle border of 18ct white gold which is arched around the round shape of the diamond. As you can see in the image below, the chain is secured in a hidden loop at the top of the pendant. To create this fine piece of jewellery, our jewellery designer began to create the design on the computer using CAD update `wp_posts` set `post_content` = Computer Aided Design). Once the design was finished on the computer, we then proceeded to print the pendant into a 3D wax version, which we then went on to cast into 18ct white gold.